PLC Programmable Controlling Bath EPS Pre-expander Machine High
Tolerance
Main Feature:
The programmable control with color touch screen control,
automatic feeding,
automatic control of temperature and pressure barrel,
automatic sensor testing material;
Application:
1. The machine adopts PLC programmable controlloer and touch screen
control,
automatic feeding,automatic electronic measurement,automatic
contorl of temperature and
pressure,dry barrel drums,etc.,have made the material once
completed,
to ensure that the machine automatically cycle of production.
2. The use of electronic weighing systems,photoeletric material
level control system,
proper grasp bulk density foam material,so that a uniform density
foam beads after each error
is less than 3% or less.
3. Barrel body temperature and vapor pressure,the use of advanced
high-precision
Japanese pilt valve control,ensure that the pressure relief valve
outlet is always constant,
ensure that the temperature inside the tank advance machine control
within ±1% °c of,
so as to ensure the consistency of raw EPS issued prevent EPS
material
because the temperature control is not good agglomeration.
4. Automatic vacuum feeding device,electronic weighing
devices,combined with level switch
to achieve the automatic feeding,improved production
efficiency,reduce labor inensity.
5. The barrel constant use of closed foam,high thermal
efficiency,save steam energy
than the continuous advance machines save more than 50%
The aircraft is equipped with a high quality enclosed hot air
drying system,
good raw material in the barrel body hair dry,without going through
along
curing dry bed.Weighing system on top of the barrel,so the small
footprint
and compact machine structure.
6. The machine uses electrical,pheumatic components,valves,etc.are well-known
brand products,thus ensuring the operation of the machine stability,reliability
and
long service life.Automatic discharge barrel using compressed air
to blow the material ,
increase the feed rate.
7. The computer has a memory function,can often use the EPS raw
material
manufacture brands,specifications,foaming process,all parameters
can be recorded in the computer.When you need to use the
manufacturers
of raw materials used in the past,you just press a computer touch
screen can
quickly go back to the original process.
8. The machine is suitable for high altitude areas of foam
production,
play a pressure foaming machines superiority
(In the same environment Continuous Pre machine productivity is
very low.)
Technical Data:
Item | Unit | FDS1100A |
Expansion Chamber
| Diameter | mm | Dn1100 |
Volume | m³ | 1.4 |
Usable Volume | m³ | 1.0 |
Steam
| Entry | Inch | 2’’(DN50) |
Consumption | Kg/Cycle | 6-8 |
Pressure | Mpa | 0.6-0.8 |
Compressed Air
| Entry | Inch | 2’’(DN50) |
Consumption | m³/Cycle | 0.9-1.1 |
Pressure | Mpa | 0.5-0.8 |
Drainage
| Upper Drain Port | Inch | 4’’(DN100) |
Lower Drain Port | Inch | 4”(DN100) |
Lower Drain Port | Inch | 3’’(DN80) |
Material Conveying Line | Inch | 6’’(DN150) |
Capacity
| 10g/l | 320 |
15/g | 550 |
20g/l | 750 |
30g/l | 850 |
Connected Load/Power | Kw | 19 |
Expaned Density | m³ | 10-40 |
Density Tolerance | % | ±2.8% |
Overall Dimension(L*W*H) | mm | 2900*4500*5900 |
Weight | Kg | 3200 |
Terms:
Validity: 60 days
Terms of Payment: 30% advance payment by T/T upon signing of sales
contract
70% covered by confirmed irrevocable L/C by sight or T/T before
shipping.
Delivery: 60 days after receipt of advance payment.
Installation and Start-up: TWO technicians will be assigned to
coordinate installation,
commissioning and training; cost for flight ticket,
suitable accommodation and additional USD 100/day/each worker fee
will be covered by Buyer,
Warranty: 12 months limited warranty
starting from date of arrival excluding wear parts.
Shipping cost for parts to be replaced during warranty period
have to be borne by the customer.
