The machine can automatic and efficient carry out
heating , cooling , feeding and ingot stripping process
to adapt to different EPS products.
Various of heating methods can be optionally used as
per the product form so as to ensure the product quality.
A vacuum and negative pressure system can ensure a low water
content ,
rapid shaping , and shorer drying period (or without drying) .
Application:
1. The machine adopts PLC programmable controller and touch
human- machine interface control,advanced foam molding process,
can produce a variety of products.
2. The machine produced a variety of foam products,
low power consumption,size and stability.
3. The machine executable automatic,semi-automatic and manual
operation started
in the middle of four operating mode,equipped with safety
protecting devices,
can ensure safe and reliable operation.
4. The machine uese programmable controllers,
touch human-machine interface.
Executable computer production control management,
high degree of automation,simple
operation,easy maintenance,labor intensity at the end.
5. The machine adopts the international advanced electrical
and hydraulic intergration,improve the speedof
molding products,a significant reduction in energy
consumption and reduce ebvironmental pollution.
6. The machine uses a variety of heating progress,
a variety of feeding methods and cooling.
7. The machine vacuum system to accelerate the rate of
product effectiveness,reduce cooling time,
product moisture content is low.
8. The machine uses the control instruments,
electrical,pneumatic components,
valves and other supporting
both domestic and foreign high-quality brand-name products.
9. The aircraft complete fault diagnosis and
motor overload protection system,relay protection,
and ensure safe operation of the PLC
and touch human-machine interface.
10.The aircraft FAV1400 type machine mold box
to Unviversal 1000-1400mm mold,FAV 1750 mold box to
Universal 1400-1750mm mold.
11.The aircraft can choose mechanical or hydraulic release models.
Pneumatic de-mould,
mould moving actuated by two hydraulic cylinders
Technology Data:
Item | Unit | FAV1400 |
Mould Dimension | mm | 1400 * 1250 |
Max Product Dimension | mm | 1250 * 1100 *420 |
Stroke | mm | 150~1500 |
Steam | Entry | Inch | 4’’(DN100) |
Consumption | Kg/Cycle | 6~9 |
Pressure | Mpa | 0.5-0.7 |
Cooling Water | Entry | Inch | 3’’(DN80) |
Consumption | Kg/Cycle | 50~150 |
Pressure | Mpa | 0.3-0.5 |
Compressed Air | Entry | Inch | 2’’(DN50) |
Consumption | m³/Cycle | 1.8 |
Pressure | Mpa | 0.5~0.7 |
Drainage | Inch | 6”(DN150) |
Capacity 15Kg/m³ | S | 70~140 |
Connected Load/Power | Kw | 12.5 |
Overall Dimension(L*W*H) | mm | 4700*1920*3250 |
Weight | Kg | 5500 |
Terms:
Terms of Payment: 30% advance payment by T/T upon signing of sales
contract
70% covered by confirmed irrevocable L/C by sight or T/T before
shipping.
Delivery: 60 days after receipt of advance payment.
Installation and Start-up:
TWO technicians will be assigned to coordinate installation,
commissioning and training; cost for flight ticket,
suitable accommodation and additional USD 100/day
each work fee will be covered by Buyer,
Warranty: 12 months limited warranty
starting from date of arrival excluding wear parts.
Shipping cost for parts to be replaced during warranty period have
to be borne by the customer.
